- #Agilent chemstation change data file path software#
- #Agilent chemstation change data file path free#
#Agilent chemstation change data file path software#
Open the ‘file’ menu click “save as” option open “method” and input method name with the help of words key and click OK.ĥ.2.12 The software prompts you for a program name to save the program. In “Run Time Checklist ” option select required method section to run and then click OKĥ.2.11 In the finish window at the end enter a title to describe the program. and then click OK.ĥ.2.10 In “Instrument Curve” option select required data curve and then click OK. If required wavelength change during analysis create timetable program as per requirement and then click OK.ĥ.2.9 In “Specific Report” option select the report style e.g.
Open Edit Integration Events click OK.ĥ.2.8 In “VWD Signal” option enter the wavelength number by numerical key. Then open signal details option click OK. And click OK.ĥ.2.7 In “Column Thermostat Method” option, input the required Temperature value and click OK. Input stop time for run sample and set maximum pressure to 400psi. isocratic/ gradient) from “gradient type” create timetable program for the pump as per test requirement.
Injection needle wash option highlighted and input solvent washes vial number and click OK.ĥ.2.6 In “Set up Pump” options input flow rate value per/ml of flow required (i.e.
and screen will be change red to green.ĥ.1.16 Open the purge valve of the instrument and purge the corresponding solvent line(s) in which mobile phase have been placed by setting the flow rate of the pump as 5.0 ml/min, using “Setup Pump” menu from the panel for few minutes until the solvent line is completely filled with new mobile phase.ĥ.1.17 Ensure that no air bubbles are noticed in the solvent line.ĥ.2.1 Click on the Method folder of respective instrument and create a new method.ĥ.2.2 To create a new method click on method file menu, click, input comment for the old method from the window displayed and click OK.ĥ.2.3 To create a new method click on method file menu, open “Edit Entire Method” displayed and click OKĥ.2.4 Enter method information if any and then click OK.ĥ.2.5 In “Set up Injector” option enter the injection volume as per requirement.
After the completion of self-diagnosis, the main menu of the workstation is displayed.ĥ.1.10 Double click the Chemistation icon on the desktop screen to open the Chemistation software.ĥ.1.15 Switch on the instrument (Including Injector, Pump, Thermostat, Column and UV lamp) by clicking the “ON” button on the extreme left middle corner of the screen. Suspend the inlet tube into the reservoir bottle and ensure that the filter is below the level of the mobile phase.ĥ.1.6 Ensure that appropriate solvent mixture is pumped for seal wash.ĥ.1.7 Ensure that the outlet tube from the detector is dipped into a waste bottle.ĥ.1.8 Connect the column specified in the individual test procedure in column oven compartment in the flow direction marked on the column.ĥ.1.9 Switch on the mains of PC.
#Agilent chemstation change data file path free#
This is applicable to the operation of HPLC system using Chemistation software for Agilent HPLC system.ĥ.1 Operation of High performance Liquid Chromatographĥ.1.1 Ensure that the HPLC System is placed on a clean and dust free platform.ĥ.1.2 Ensure that the instrument has been connected to power supply.ĥ.1.3 Ensure that the all communication cords between the units are connected properly.ĥ.1.4 Switch on the mains and press the power switch of all modules.ĥ.1.5 Prepare the mobile phase as mentioned in the standard test procedure of specific product. To lay down a procedure for the operation of HPLC system using Chemistation software.
0 kommentar(er)
